Schedule Logo

Poster Session II

4:30 pm – 6:30 pm, Wednesday October 15 Session DW5 COEX, Lobby E
Topics:
PrevNext

Advanced control of plasma characteristics by sidewall impedance tuning in 60 MHz capacitively coupled plasma systems

Poster 40
Presenter: SANGHYEOK PARK (Plasma Equipment Intelligence Convergence Research Center, Korea Institute of Fusion Energy, Korea)
Authors: Yong-Hyun KIM (Plasma Equipment Intelligence Convergence Research Center, Korea Institute of Fusion Energy, Korea), Dae-Chul Kim (Plasma Equipment Intelligence Convergence Research Center, Korea Institute of Fusion Energy, Korea), Jong Sik Kim (Plasma Equipment Intelligence Convergence Research Center, Korea Institute of Fusion Energy, Korea)
Collaboration: -

In 60 MHz high-frequency capacitively coupled plasma (CCP) systems, precise control of spatial plasma distribution near chamber sidewalls is essential for process uniformity. While previous simulation-based studies suggested that sidewall impedance affects plasma behavior, this work experimentally validates the concept. A ceramic sidewall with an embedded copper antenna was connected to an external tunable circuit (0.2 μH inductor in parallel with a ~100 pF capacitor), enabling impedance tuning from capacitive to inductive. This tuning was effective at 60 MHz but negligible at 13.56 MHz, confirming frequency dependence.

 

Experiments were conducted in argon plasma at 500 W under 50, 100, and 200 mTorr to evaluate pressure and impedance of sidewall effects. Diagnostics included electron density profiles, ion energy distribution functions (IEDFs), and optical emission spectroscopy (OES). Calibrated VI probes were installed at the powered top electrode (TE), grounded bottom electrode (BE), and the tunable sidewall to analyze voltage and current waveforms. From this, we extracted ΔVTE–BE and ΔVWall–BE to infer current paths and power deposition.

 

A localized density peak (~+3 to +4 mm) was observed near the baffle, confirming active modulation via impedance tuning. VI and OES data showed consistent correlations among RMS values, intensity, and density. The impact increased with pressure. When ΔV TE–BE > > ΔVWall–BE, power favored the TE, reducing edge density. The opposite condition increased sidewall density. This provides a practical method for tuning plasma uniformity in high-frequency CCP systems.

 

Funding acknowledgement

This work was supported by the National Research Council of Science & Technology (NST) grant by the Korea Government (MSIT) (CRC20014-000)

POSTERS (88)